Error
There are not enough stock for the product Gtechniq P1 Nano Composite Polish
There are not enough stock for the product Gtechniq P1 Nano Composite Polish Gtechniq P1 Nano Composite Polish
- Description
- Specifications
- Comment
- Post a comment
Breakthroughs in nano-structured composite materials have allowed us to develop an incredibly uniform abrasive particle on the nanoscopic scale. This has allowed Gtechniq to manufacture a polish that requires almost no lubrication giving it three major advantages over traditional polishes:
- With many more active particles working on the surface, the polish works faster with less effort
- Virtually no lubricant means there is no 'drop back'. The number of lubricants in traditional polishes are designed to hide minor imperfections which are revealed again when the polish is washed off - with P1 what you see is what you get
- Smaller active particle size means the surface does not heat up nearly as much, therefore it is less likely to burn through paint. The lack of heat also means you can make several passes over the same area to remove stubborn scratches, without the fear of over polishing
When tested against leading hand polishes P1 outperforms. And, because P1 does not use fillers, your car's new finish that used a lot of elbow grease, will not deteriorate.
Plus instead of needing a cutting compound, medium compound, and finishing glaze - all of which require one, sometimes two, polishing pads - P1 will do the work of these three products with fewer holograms and as previously mentioned, no "˜drop back'.
This means that perfecting automotive surfaces using Gtechniq P1 requires half the amount of passes with the rotary machine than with conventional systems, allowing for more time enjoying your car than maintaining it.
- One product does work of three
- Produces durable true finish
- Gives perfect finish quickly
Application Information
- Make sure that the surface you are working on is not in direct sunlight and is cool to the touch
- Shake the bottle vigorously before using
- Ensure polishing pads are clean and free from particulates before use
- Ensure all surfaces to be polished are clean and contaminant-free as any surface contamination can introduce deeper scratches during the polishing process
- Always keep a film of P1 Nano Composite Polish on the surface
- As P1 is water based you can reactivate dried polish with a water spray
- With a rotary , we recommend polishing between 900 and 1,200 rpm but remember when using higher rpm to use faster strokes
- P1 can also be used with Dual Action (DA) polishing machines such as the Rupes BigFoot LK900E Mille Gear Driven Polisher and by hand
- Use P1 Nano Composite Polish within 2 years of purchasing, for best results, once opened use within a year
Brand: National Detail Pros
Social