0

Nanoskin FORMULA 67 Professional Quick Detailer
SKU: 14_NA-F6716

$11.99 each
Volume
No stock Notify me when available
Add to wishlist
  • Description
  • Specifications
  • Comment
  • Post a comment

Key Features:
Removes swirls and light oxidants
Adds a durable layer of wax protection
Perfects and protects your paint in one step

Nanoskin FORMULA 67 Professional Quick Detailer removes swirls, water spots, stains and light oxidation while restoring gloss and adding a durable layer of wax protection. FORMULA 67 can be applied by hand, with a dual action polisher or a rotary polisher. Application couldn 't be easier than with Nanoskin MICROBUFF Polishing Pad and a dual action polisher. Whether you 're a novice or a pro, you 'll get expert results. If the paint is severely neglected, use Nanoskin NANO CUT Finishing Compound with MICROBUFF Cutting Pad prior to using FORMULA 67.

Directions:
For best results, use on clean, cool paint and out of direct sunlight.
Clean pad frequently using pad conditioner brush or compressed air using regulatory approved air nozzle.
Suggested Tools for Optimum Results-
FLEX XC 3401 VRG Dual Action Orbital Polisher
RUPES LHR 15ES Big Foot Random Orbital Polisher
RUPES LHR 21ES Big Foot Random Orbital Polisher
Removing 1,500 ~ 2,500 Grit Wet Sanding Marks-
1. Apply Nanoskin SPEED CUT Cutting Compound uniformly to MICROBUFF Cutting Pad.
2. Buff at 4800 opm, working a 2 ' x 2 ' section.
3. Wipe residue off using a soft, clean microfiber towel.
4. Make your own choice for finishing:
A. Apply Nanoskin FORMULA 67 Professional Quick Detailer
with MICROBUFF Polishing Pad to add a layer of wax and
restore showroom gloss. (Speed 3800 opm)
B. Apply Nanoskin SEAL NANO Perfect Sealant with
MICROBUFF Finishing Pad to remove gloss-hindering defects
while leaving a durable layer of paint protection behind. (Speed 3800 opm)
Removing 2,500 ~ 3,000 Grit Wet Sanding Marks or Finer scratches-
1. Apply Nanoskin NANO CUT Finishing Compound uniformly to MICROBUFF Cutting Pad.
2. Buff at 4800 opm, working a 2 ' x 2 ' section.
3. Wipe residue off using a soft, clean microfiber towel.
4. Make your own choice for finishing:
A. Apply Nanoskin FORMULA 67 Professional Quick Detailer
with MICROBUFF Polishing Pad to add a layer of wax and restore showroom gloss. (Speed 3800 opm)
B. Apply Nanoskin SEAL NANO Perfect Sealant with
MICROBUFF Finishing Pad to remove gloss-hindering defects while leaving a durable layer of paint protection behind. (Speed 3800 opm)

NOTE:
PAD REJUVENATION
The heavy and quick cutting of some polishers can cause the surface to become very hot and cause the oils in the polishes/compounds to prematurely flash off.
One fine mist of Nanoskin PAD REJUVENATOR to the center of the used pad is enough lubrication to reactivate the polishes/compounds left on the pad and get it back to a serviceable condition.
DO NOT APPLY MORE POLISHES/COMPOUNDS TO THE PAD until all excess compound is removed off the pad and the pad is completely lubricated then apply a quarter size (1" diameter or 2.5 cm.) amount of product to center of pad.
More compound IS NOT the answer. After spraying PAD REJUVENATOR on the pad, you will find you will be able to finish a section without any additional compounds. There was a commercial many years ago saying, "A little dab will do you" and that 's the way this system works.

Brand: Nano SkinNano Skin
List of the comments:
No comments have been posted yet.
Product Votes:

Give your advice about this item:

Username:
E-mail:

Create an account

Don't have an account? Register to start earning FREE stuff and simplify checkout!

  • Manage your detail appointments online.
  • Save your addresses, vehicles, carts & orders.
  • Faster checkout.
  • Earn points to redeem for money!
  • Promotions & Coupons.